Remember, you are not trying to
redry the material, just keep it from picking up moisture.
The tests discussed were sieve analysis, sand pH/ADV, dry sand density, turbidity, tensile evaluation, dip
redry tensile strength, core density, cure speed, bench life, hot strength, permeability, delayed tensile strength, humidity chamber and test casting.
Redry the mold and turn on just one circuit at a time, allowing ample time for water to reappear at the bottom of the plate.
Throw out anything moldy, and
redry anything that created moisture in the jar.
Dip
Redry Tensile Strength--To measure dip
redry tensile strength, a set of cores are made with the correct immediate tensile strength.
If you are really adventurous, put the ribbons inside the shoe and place the pair in a 200-degree oven with the door open to
redry the original glue.
The refinery normally then has to
redry the tea, so that by the time it finally leaves the refinery it has lost much of its freshness.
This synthetic, non-shifting material, doesn't dry out, absorb moisture,
redry, warp or constantly shift.
A look at
redry. In: Proceedings of Western Dry Kiln Clubs, 24th Annual Meeting, May 10-11, 1973, Vancouver, British Columbia; Western Dry Kiln Clubs, Corvallis, Oregon.
Volume and weight changes were slower from dry to saturation than those from saturation to
redry (Fig.
The columns and associated equipment were transported to a facility where green Douglas-fir (Psuedotsuga menziesii) veneer was dried at 165 to 180 [degrees]C and
redry veneer at 135 to 140 [degrees]C.